How much does it cost?
3D Printing is currently 15 cents per gram of filament used in the printing process, with a minimum charge of $2.50.
What can be printed?
All printing is done with PLA, a bioplastic made of corn. So it is not recommended to print anything that needs to be heat resistant or super strong. It is possible to make the model a little bit stronger by making its walls thicker or requesting more infill. Ask librarians about it and they will try to help out.
What cannot be printed?
Due to demand and limited resources, the library will not print any job that will take over two hours. If there is something that would take longer than that, librarians are happy to help figure out how to break up the model into smaller jobs, scale the print, or refer to one of the many paid 3D printing services. The library retains the right to refuse any print request for any reason.
How To Get The Object Printed
1. Create a file
- Download an object file from a site like Thingiverse, Cubehero, or Bld3r or use free modeling software like SketchUp, Blender and Mineways to create designs.
- Export your object as a .makerbot file. Need help? Just ask the friendly librarians!
- Note: The library will print your file as is. If you need help optimizing or troubleshooting, just ask for help before submitting.
2. Submit a print request
- Save a .makerbot file on an USB flash drive.
- Come into the library during open hours. Submit your flash drive, and a 3D Print Request Form to library staff. Staff or volunteers will help you make sure the model is ready for printing and ensure that it can be printed within our two hour limit. It is recommended that patrons create a backup of the project print file before submitting their flash drives.
3. Collect your print
- After notification when the print is complete, it will be held at the library for ten days to allow time to collect the print and USB flash drive. After ten days both become property of the library. PLEASE NOTE: “complete” does not always mean “successful.” The library will still notify when the print is done even if it does not come out perfectly. Re-prints will only be available in the event of machine malfunction. Failed prints due to errors within the 3D model will still be charged for materials used.
- Prints can be collected during regularly scheduled library hours.